All Odin Flash Tool & Version
Odin Flashing Tool Download
The Odin software only works with Windows, so make sure to have a PC handy. First, download the latest version of Odin. Extract the ZIP file for the latest version and run the EXE file inside of it to launch Odin.
Step 5Put Your Phone in Download Mode & Connect to PC
With the device turned off, press Power + Volume Down + Home to enter Download Mode. Some older devices use a different button combination. To find the exact key combination for your device, just do a simple Google search — for instance "Galaxy S3 download mode." At this point you can connect the phone to your PC using the USB data cable.
Newer Galaxy phones without a home button will require a different button combo to enter Download Mode (Volume Down + Bixby + Power). You can read more about the quirks of entering Download Mode on these devices here.
Step 6Flash the Firmware Files
Odin3 v3.12.7- latest version
Download ODIN and install ODIN or Winrar extract here,or Zip File extract Before Open
Download
ODIN Flash Tools
Odin tool as Open on your PC.
*1. Download Flash File
* And Extract On Your Computer
* After Extracting You Will Find The
* Install the USB Drivers Skip If Drivers Are Already Installed.
* Run The Existing Flash Tools (Run As Administrator)
* Load The File From Your Computer (Where The file extract You)
#2: Reboot your device and download mode. hold down the Volume down+Home+Power simultaneously for about 5 sec andHit Volume up to continue.( Warming!!- )Volume up: yes.
#3: While in odin mode, connect your device to PC via the USB port. Make sure that your device is connected to Odin by looking at the ID:COM section. (Downloading - Do not turn off Target!!) Massage
# 4: Click on the PA/PDA (Older versions of odin have PDA instead of PA) button and select the firmware file tar.md5.
# 5: Wait for Samsung tool to analyze the file.
#6: From here on, hit the Start button to start flashing the firmware using Odin.
#7 minutes to complete the process. Complete PASS!
Reboot Now
Head back to the Odin application. Click on the 'BL' button, then choose the file that starts with "BL" inside your extracted firmware folder. Next, click on the 'AP' button in Odin and choose the AP file inside your extracted firmware folder. Click on the 'CP' button, choose the CP file inside your extracted firmware folder. Click on the 'CSC' button, choose the HOME_CSC file inside your extracted firmware folder.
Important
100% work if you download the file in the back part or version of your set Will do Always try to download files or back up the phone Do the flush.
No comments
Wellcome