Samsung Galaxy J1 Mini Prime SM-J106B (Indonesia) Flash File firmware Without Password 100% Tested

Samsung Galaxy J1 Mini Prime SM-J106B
Flash File  firmware Without Password 100% Tested

Here’s what you need to download the official Samsung Galaxy J1 Mini Prime SM-J106B  (firmware) flash file onto your computer. You can then use one of the flashing tools that were made to work for your device to update the firmware

                                 

Samsung Galaxy J1 Mini Prime SM-J106B
J106BDSU0AQF1_J106BOLE0AQF1_XID_4file.zip

The Samsung Galaxy J1 Mini Prime SM-J106B  flash file is an easy task, thanks to the flashing tool’s user-friendly interfaces that usually require just one click before the flashing is underway.

You can sometimes have a choice of what flashing tool you want to use to flash the  Samsung Galaxy J1 Mini Prime SM-J106B 4 File Downlaod 

The file has been collected from a new phone. It is completely virus-free. If you flash with this file then your The phone's Google account, the hang logo, the standard virus, the dead phone, the display screen will solve the problem of white or black. The Samsung Galaxy J1 Mini Prime SM-J106B Stock ROM  file comes with 100% OK. So you can download the file safely. There is no box needed to flash the file No, it can flash the flash tool section

Download ODIN and install ODIN or Winrar extract here,or Zip File extract Before Open

Download Link 

ODIN Flash Tools

WinRAR x86 (32 bit) 5.70 

WinRAR x64 (64 bit) 5.70

How to Flash Samsung Galaxy J1 Mini Prime SM-J106B   Using Odin

Odin tool as Open on your PC.

*1. Download Flash File

* And Extract  On Your Computer

* After Extracting You Will Find The

* Install the USB Drivers Skip If Drivers Are Already Installed.

*  Run The Existing Flash Tools (Run As Administrator)

* Load The File From Your Computer (Where  The file extract You)

#2: Reboot your device and download mode.  hold down the Volume down+Home+Power simultaneously for about 5 sec andHit Volume up to continue.( Warming!!- )Volume up: yes.

#3: While in odin mode, connect your device to PC via the USB port. Make sure that your device is connected to Odin by looking at the ID:COM section. (Downloading - Do not turn off Target!!) Massage

# 4: Click on the PA/PDA (Older versions of odin have PDA instead of PA) button and select the firmware file tar.md5.

# 5: Wait for Samsung tool to analyze the file.

#6: From here on, hit the Start button to start flashing the firmware using Odin.

#7 minutes to complete the process. Complete PASS!

Reboot Now

   Odin 4 file guidelines

Important Notes
Back Up Your Data: You should always back up your data before you begin flashing new firmwar files to your Samsung  smartphone or tablet

100% work if you download the file in the back part or version of your set Will do Always try to download files or back up the phone Do the flush.